The San Fernando Valley’s Trusted Landscape Contractor
The San Fernando Valley’s Trusted Landscape Contractor
Skip the water bill, the mower, and the brown patches. Get a lawn that stays green in every season.
You water on schedule, mow every week, and still find yourself patching brown spots or reseeding thin patches every few months. It’s not that you’re doing anything wrong. Natural grass simply demands constant attention to look the way it did on the day it was installed, and the moment that attention slips, so does the lawn.
At Pristine Gardenscape, our artificial turf installation in Sherman Oaks is designed to break that cycle for good. Before any turf is ordered, we assess your yard’s soil, drainage, and sun exposure, so the finished lawn is built to perform, not just look good on day one. The result is a lawn that stays green through every season, with none of the watering, mowing, or maintenance schedule that used to run your weekends.
We follow the same process on every artificial turf installation, from our first site visit to the final touches. Each step is handled with care, because a lawn is only as good as the work that goes into it. Here’s what that looks like from start to finish.
Site Assessment and Measurement
Before anything is ordered, we walk the entire property and take precise measurements of the area being converted. We also check for drainage patterns, low spots, and grading concerns that could affect the results. This assessment shapes how the installation is planned from the very first step.
Removal of Existing Grass and Debris
Old sod, weeds, roots, and any rocks or debris are cleared from the area before installation begins. This gives the turf a clean, stable foundation to sit on. Skipping this step often leads to uneven surfaces or growth pushing through the turf later.
Grading and Base Preparation
The soil is leveled and compacted using a proper base material designed for turf installations. This prevents the surface from shifting, sinking, or developing uneven spots over time. A well-prepared base is key to how long the lawn holds up.
Drainage Layer Installation
A permeable base is installed beneath the turf to let water pass through instead of pooling on the surface. This matters most during heavier rainfall, when standing water can otherwise damage the lawn. Proper drainage keeps the surface performing well year-round.
Turf Laying and Seaming
Turf is carefully cut and fitted to match the exact shape and dimensions of the space it’s covering. Seams are joined tightly so transitions between pieces stay smooth and invisible. The goal is a lawn that reads as one continuous surface.
Infill Application and Brushing
Infill is worked into the turf fibers to help the blades stand upright and feel natural underfoot. It also adds cushioning and supports proper drainage through the base. A final brushing step lifts the fibers and evens out the surface for a finished look.
Once the turf is down, the benefits show up fast, and they keep showing up all year
Your weekends open up once the mower, edger, and fertilizer schedule are no longer part of your routine.
The lawn stays the same shade of green through summer heat and winter cold, without irrigation adjustments.
Removing a natural lawn from your water demand makes a noticeable difference on your monthly bill.
Without weeds competing for space, the lawn keeps its finished appearance with far less upkeep on your part.
Heavy foot traffic, pets, and shade no longer wear down the lawn the way they would with sod.
Artificial turf in Sherman Oaks isn’t limited to a standard backyard lawn. We install turf across a range of spaces depending on how you use your property and what you’re trying to solve.
Backyard Lawns
A full backyard replacement gives you a lawn that looks freshly cut every day of the year, with no watering schedule to manage.
Front Yard Curb Appeal
A well-maintained front lawn sets the tone for the entire property, and turf keeps that impression consistent regardless of the season.
Side Yards and Narrow Spaces
Areas that are difficult to irrigate evenly or too tight for a mower are often the best candidates for turf, since they tend to struggle the most with natural grass.
Pool Surrounds
urf around a pool deck resists the moisture and heavy use that often leave natural grass patchy or muddy near the water’s edge.
Dog Runs and Pet Areas
A dedicated turf area gives pets a consistent surface to use without the digging, mud, or dead spots that come with natural grass.
Each of these applications is handled with the same base preparation and drainage planning, so the result holds up whether it’s a small side yard or a full property refresh.
The ‘Pristine Gardenscape’ Difference
Choosing a landscape contractor is a decision about trust as much as design. Here is what that trust is built on with us:
Installation Process
Every installation follows a proven process to ensure your turf looks great and drains properly for years to come.
Site Preparation
We remove existing grass, weeds, and debris. The ground is graded and leveled to ensure a flat, stable base — essential for a flawless finish.
Drainage Base
A crushed aggregate base (typically 3–4 inches) is compacted and shaped for proper water flow, preventing pooling and odor buildup over time.
Turf Laying & Seaming
The turf is precisely cut to fit, seams are secured using professional-grade adhesive and staples, and edges are nailed down for a seamless look.
Infill & Finishing
Infill material (silica sand or crumb rubber) is brushed in to support the blades, add cushioning, and give the lawn a realistic, upright appearance.
Most residential turf projects are completed within a few days, depending on the size of the area and the amount of site preparation required. Properties needing extensive grading or drainage work may take a bit longer to finish properly. We review this during your consultation and provide a clear timeline before any work begins.
No, not when it's installed correctly. Today's turf is designed with varied blade lengths and natural color blending, so it reads as a real lawn instead of a flat green mat. Proper installation, including careful brushing and infill placement, plays a large role in how convincing and natural the final lawn looks up close.
We remove the existing grass, roots, weeds, and any debris down to bare soil before installation begins. This step is necessary to prepare a stable, even base for the turf. It also prevents old growth from pushing through or interfering with the new surface once everything is installed and finished.
Infill is a granular material that gets worked into the turf fibers after installation is complete. It helps the individual blades stand upright, adds cushioning underfoot, and supports proper drainage through the base. Without it, turf can flatten unevenly over time and lose the natural appearance it had on day one.
With proper installation and normal residential use, artificial turf holds up well for many years before it shows significant wear. Durability depends on factors like foot traffic, sun exposure, and how thoroughly the base was prepared during installation. This is why we take base preparation seriously on every single project we take on.
Yes, turf is a common and practical choice around pool decks and patios. It resists the moisture and heavy foot traffic that often damage natural grass growing in those same areas. We plan drainage carefully in these zones during installation to prevent water buildup and keep the surface performing well for years.
Yes, the turf materials we install are designed to handle regular use, including active play and pets. A properly prepared base and drainage layer also help keep the surface clean, stable, and comfortable underfoot every day. This makes it a practical, low-maintenance option for households with kids or animals spending time outdoors.
Cost depends on the size of the area, the condition of the existing yard, and how much site preparation is needed before installation. We provide a clear, itemized estimate after assessing your property in person during the consultation. This way, there are no surprises or hidden costs once work actually begins.
